Yorke White porcelain paving tiles bring a fresh, elevated feel to any outdoor space. Inspired by the soft character of aged limestone, its pale tone reflects natural light beautifully, brightening patios, courtyards, and garden paths with an elegant, organic finish. 

Delicate fossil markings and softly tumbled edges add authentic detail, offering all the visual warmth of heritage stone with the durability of porcelain tiles.

Frost-resistant and easy to maintain, this light paving slab is a perfect choice for creating bright, timeless outdoor settings that feel refined.

Perfect for

• outdoor

Adhesive

Porcelain paving can be installed without fixing products as long as it's fully supported by a solid material.  It can be installed on grass, gravel and sand bases.  Porcelain paving can also be installed onto concrete/screed substrates with a suitable external grade adhesive.  All of our rapid setting adhesives are recommended. It can also be installed on sand and cement mortar bases same as traditional stone paving.  Porcelain paving is strong enough to be installed on "pedestal" systems.

Sealing

Porcelain paving requires no sealing or ongoing maintenance, unlike natural stone that requires regular cleaning and re-sealing. We do however strongly recommend using LTP Porcelain Tile Protector during installation as it protects the surface when using brush-in grouts that can potentially bind to the surface causing a “dusty” appearance when dry. It furthermore protects against staining from organic matter like berries and wet leaves over time.Grout

Grout

Any external grade grout can be used.  Specific brush-in grouting systems have also been formulated for use with porcelain paving. We recommend ProJoint Rapidflow Brush-In Porcelain Grout in Light Grey. However, this is not suitable for use on paving installed on a concrete sub-base. For these cases, we'd recommend Grout3000 or other cement-based grouts.

Cleaning

Porcelain paving can be cleaned with any household product.  We do not recommend the use of acidic "patio cleaning" products that may damage the surface.  The use of high pressure washers is acceptable as long as the pressure is kept away from grout joints.

Tolerances & Fitting

Porcelain tiles & porcelain paving slabs are subject to manufacturing tolerances in relation to size, flatness and squareness.  Please be aware that not all tiles/slabs will or can be perfectly the same size, flat or absolutely square.  The standard governing manufacturing tolerances is EN14411.  In relation to flatness, for example, a tile or slab can have an allowed curvature of +/-2mm measured at the centre of the slab using a straight edge across the entire slab.  It is not possible to accurately measure flatness by putting two tiles face to face as this doubles any visible curvature.  For more info, feel free to call to discuss with an expert.

CLICK/TAP FOR INSTALLATION GUIDE

Pallet Deliveries

Typical delivery times are 2 - 3 Working Days

Next Day delivery is available to most areas at additional cost.

We deliver throughout the UK except for Northern Ireland.

Deliveries are made on pallets and are ‘kerbside’, meaning the pallets will be offloaded to the nearest safe point of entry to your property. The driver is unable to take the tiles into your house. We can deliver on a day of your choice, which will typically be 2 - 3 working days after your order has been placed. Delivery is charged by the pallet and starts from £45 / pallet. A ‘delivery calculator’ is provided underneath the Order Total once product quantity has been entered.

Somebody must be present on the day of delivery to accept the order - re-delivery charges may apply for failed deliveries.

Free delivery applies to pallets of indoor porcelain & LVT over £600 only. Certain postcodes do not qualify for free delivery and will require an additional delivery charge. Please refer to our delivery page for the full list of effected postcode areas.

Click here for detailed info about our delivery services.