£42.90 / m²
120 x 60 cm - IN STOCK
Add your area to calculate tiles required
Delivery from Wed 6th December
Add the recommended 10% for cuts and wastage
PLEASE NOTE: Avoid the expense & inconvenience of reordering. We strongly recommend you add at least 10% to your calculated area to be tiled to cover cuts, breakages and damages. All tiling jobs incur this type of wastage – don’t be left short!
- Nationwide express delivery
- Order 3 free samples
- We are here to help - Call our team on 0161 277 6850
About this product
Step into an ethereal, aquatic haven with a bathroom decorated entirely in the Onyx Blue tiles. Evocative of waves crashing against the shore, moody skies and dramatic tempests, it’s an onyx effect tile which suits bathrooms perfectly.
That’s not to say it can’t be used to stunning effect in hallways and kitchens as well. With variegated veining, which ranges from seaweed green, to teal, to lavender, it’s a gorgeous design statement wherever you feature it.
In terms of accessories, we recommend deep navy, charcoal grey and off-white tones to complement this naturally nautical palette.
Onyx Blue Polished Porcelain Tiles is perfect for
|Surface finish||Polished [Shiny]|
|Suitable with underfloor heating||Yes|
|Suitable for external use||No|
Installation and care
White rapid-setting flexible adhesive is recommended - standard setting adhesive is also suitable.
IMPORTANT! Polished porcelain tiles like Onyx Blue require sealing during installation and before grouting takes place.
Only use fine grain grout. We recommend "Natural" with Onyx Blue Polished Porcelain Tiles. See fixing section for grout alternatives.
General household cleaners are acceptable but for the best results use a product specially formulated for Porcelain Tiles. We recommend LTP Porcelain cleaner available in the fixing section.
Tolerances & Fitting
Porcelain tiles & porcelain paving slabs are subject to manufacturing tolerances in relation to size, flatness and squareness. Please be aware that not all tiles/slabs will or can be perfectly the same size, flat or absolutely square. The standard governing manufacturing tolerances is EN14411. In relation to flatness, for example, a tile or slab can have an allowed curvature of +/-2mm measured at the centre of the slab using a straight edge across the entire slab. It is not possible to accurately measure flatness by putting two tiles face to face as this doubles any visible curvature. For more info, feel free to call to discuss with an expert.
Typical delivery times are 2 - 3 Working Days
We deliver throughout the UK except for Northern Ireland.
Deliveries are made on pallets and offloaded to the nearest safe point of entry to your property aka "Kerbside". The delivery driver is unable to take the tiles into your house.
We can deliver on a day of your choice, although this will typically be 2 - 3 working days after your order has been placed. Delivery is charged by the pallet and starts from £35 / pallet.
Somebody must be present on the day of delivery to accept the order - re-delivery charges may apply for failed deliveries.
A "delivery calculator" is provided underneath the Order Total once product quantity has been entered. Certain postcodes in IV KA KW PA PH & PO are not charged at standard rates. Please call to check.
0161 277 6850