This is an end-of-line product and will not be restocked once it sells out. To avoid shortages later, we advise ordering a little over the standard 10% extra to cover cuts and spares. As once it’s gone, it’s gone!

Orchid Blush pink marble-effect tiles bring a soft, luminous warmth to modern bathrooms and feature walls. Washed in gentle tones of rose, cream and honey, each piece has that layered, translucent look you get with real onyx that feels almost lit from within. The veining is subtle but expressive, giving these beautiful pink tiles movement without shouting for attention.

In this generous 60×120cm size, the pattern really has space to breathe. Laid on a bathroom wall, behind a vanity, or even as polished floor tiles, the effect is elegant in a way that feels fresh rather than formal, instantly softening a scheme while adding a note of luxury.

Made from durable porcelain, these large-format tiles are durable and practical too, giving you the ease of modern living, that doesn't skimp on the romance of pink onyx.

Key features:

• Finish: polished porcelain with a high-shine finish
• Durability: impressively tough, waterproof porcelain
• Style: perfect for beautiful bathrooms and statement surfaces
• Surface: Usable on both walls & floors

For more inspiration see our:

• Marble-effect Tiles
• Onyx-effect Tiles
• Bathroom Tiles
• Wall Tiles

Perfect for

• living area
• kitchen
• bathroom
• wall
• floor

Adhesive

White rapid-setting flexible adhesive is recommended - standard setting adhesive is also suitable.

Sealing

IMPORTANT! Polished porcelain tiles like Orchid Blush Pink require sealing during installation and before grouting takes place. 

Grout

Only use fine grain grout.  We recommend "Almond" with Orchid Blush Pink Polished Porcelain Tiles.  See fixing section for grout alternatives.

Cleaning

General household cleaners are acceptable but for the best results use a product specially formulated for Porcelain Tiles.  We recommend LTP Porcelain cleaner available in the fixing section.

Tolerances & Fitting

Porcelain tiles & porcelain paving slabs are subject to manufacturing tolerances in relation to size, flatness and squareness.  Please be aware that not all tiles/slabs will or can be perfectly the same size, flat or absolutely square.  The standard governing manufacturing tolerances is EN14411.  In relation to flatness, for example, a tile or slab can have an allowed curvature of +/-2mm measured at the centre of the slab using a straight edge across the entire slab.  It is not possible to accurately measure flatness by putting two tiles face to face as this doubles any visible curvature.  For more info, feel free to call to discuss with an expert.

Pallet Deliveries

Typical delivery times are 2 - 3 Working Days

Next Day delivery is available to most areas at additional cost.

We deliver throughout the UK except for Northern Ireland.

Deliveries are made on pallets and are ‘kerbside’, meaning the pallets will be offloaded to the nearest safe point of entry to your property. The driver is unable to take the tiles into your house. We can deliver on a day of your choice, which will typically be 2 - 3 working days after your order has been placed. Delivery is charged by the pallet and starts from £45 / pallet. A ‘delivery calculator’ is provided underneath the Order Total once product quantity has been entered.

Somebody must be present on the day of delivery to accept the order - re-delivery charges may apply for failed deliveries.

Free delivery applies to pallets of indoor porcelain & LVT over £600 only. Certain postcodes do not qualify for free delivery and will require an additional delivery charge. Please refer to our delivery page for the full list of effected postcode areas.

Click here for detailed info about our delivery services.