Form Ivory microcement-effect tiles lean clean and architectural, but never stark. The soft, chalky Ivory has just enough tonal variation to create the same look of genuine microcement floors, with the ease and performance of a large porcelain tile.

In an entranceway, these light concrete-effect tiles set the tone straight away with a bright, open, and perfectly subtle presence. The scale of the 80x80cm tiles helps stretch the space visually, keeping everything feeling sleek and modern. They work particularly well with clean architectural features, but are just as effective when paired back with softer finishes if you want something more understated.

And being made from porcelain, these wall and floor tiles are built for real life. They're hard-wearing, easy to clean, and far more forgiving than poured concrete, making it a brilliant choice for busy areas that still need to look the part.

Key features:
• Finish: Smooth matte porcelain
• Durability: Waterproof, tough, easy-clean
• Style: Great for light, fresh spaces
• Surface: Suitable for both walls & floors

For more inspiration see our:
• Concrete-effect tile
• Bathroom tiles
• Floor tiles
• Wall tiles

Perfect for

• living area
• kitchen
• bathroom
• wall
• floor

Adhesive

White rapid-setting flexible adhesive is recommended - standard setting adhesive is also suitable.

Sealing

Form Ivory Microcement Effect Porcelain Tiles do not require sealing during or after installation. 

Grout

We recommend or "Light Grey" with Form Ivory Microcement Effect Porcelain Tiles.  See fixing section for grout alternatives.

Cleaning

General household cleaners are acceptable but for the best results use a product specially formulated for Porcelain Tiles.  We recommend LTP Porcelain cleaner available in the fixing section.

Tolerances & Fitting

Porcelain tiles & porcelain paving slabs are subject to manufacturing tolerances in relation to size, flatness and squareness.  Please be aware that not all tiles/slabs will or can be perfectly the same size, flat or absolutely square.  The standard governing manufacturing tolerances is EN14411.  In relation to flatness, for example, a tile or slab can have an allowed curvature of +/-2mm measured at the centre of the slab using a straight edge across the entire slab.  It is not possible to accurately measure flatness by putting two tiles face to face as this doubles any visible curvature.  For more info, feel free to call to discuss with an expert.

Pallet Deliveries

Typical delivery times are 2 - 3 Working Days

Next Day delivery is available to most areas at additional cost.

We deliver throughout the UK except for Northern Ireland.

Deliveries are made on pallets and are ‘kerbside’, meaning the pallets will be offloaded to the nearest safe point of entry to your property. The driver is unable to take the tiles into your house. We can deliver on a day of your choice, which will typically be 2 - 3 working days after your order has been placed. Delivery is charged by the pallet and starts from £45 / pallet. A ‘delivery calculator’ is provided underneath the Order Total once product quantity has been entered.

Somebody must be present on the day of delivery to accept the order - re-delivery charges may apply for failed deliveries.

Free delivery applies to pallets of indoor porcelain & LVT over £600 only. Certain postcodes do not qualify for free delivery and will require an additional delivery charge. Please refer to our delivery page for the full list of effected postcode areas.

Click here for detailed info about our delivery services.