This is an end-of-line product and will not be restocked once it sells out. To avoid shortages later, we advise ordering a little over the standard 10% extra to cover cuts and spares. As once it’s gone, it’s gone!

Hawthorne Beige limestone-effect tiles bring warmth through sandy, beige tones, layered with subtle variation and light fossil-like detailing that gives it that familiar aged stone feel.

At 60x90 cm, these beige floor tiles give you that clean, considered look, making it a good fit for kitchens, open-plan spaces or anywhere you want something warm but still understated. The colouring naturally complements timber cabinetry, woven textures and softer, earthy palettes, helping everything feel relaxed and cohesive.

And because these tiles are made from porcelain, you can get a realistic stone look without the maintenance, being designed for spaces that see a lot of daily use. Hawthorne Beige is also available in a matching interior format for an indoor-outdoor tile design that you can run right through your home.

Key features:

• Finish: Matte antique-effect porcelain
 • Durability: Waterproof, stain-resistant & hardwearing
 • Style: Great for country kitchens and hallway floors
 • Available in a matching outdoor tile

For more inspiration, see our:

• Limestone-effect Tiles
 • Floor Tiles
 • Kitchen Tiles
 • Indoor Outdoor Tiles

Perfect for

• living area
• kitchen
• bathroom
• floor
• wall

Adhesive

White rapid-setting flexible adhesive is recommended - standard setting adhesive is also suitable.

Sealing

Hawthorne Beige Limestone Effect Porcelain Tiles  Porcelain Tiles do not require sealing during or after installation. 

Grout

We recommend "Almond" with Hawthorne Beige Limestone Effect Porcelain Tiles.  See fixing section for grout alternatives.

Cleaning

General household cleaners are acceptable but for the best results use a product specially formulated for Porcelain Tiles.  We recommend LTP Porcelain cleaner available in the fixing section.

Tolerances & Fitting

Porcelain tiles & porcelain paving slabs are subject to manufacturing tolerances in relation to size, flatness and squareness.  Please be aware that not all tiles/slabs will or can be perfectly the same size, flat or absolutely square.  The standard governing manufacturing tolerances is EN14411.  In relation to flatness, for example, a tile or slab can have an allowed curvature of +/-2mm measured at the centre of the slab using a straight edge across the entire slab.  It is not possible to accurately measure flatness by putting two tiles face to face as this doubles any visible curvature.  For more info, feel free to call to discuss with an expert.

Pallet Deliveries

Typical delivery times are 2 - 3 Working Days

Next Day delivery is available to most areas at additional cost.

We deliver throughout the UK except for Northern Ireland.

Deliveries are made on pallets and are ‘kerbside’, meaning the pallets will be offloaded to the nearest safe point of entry to your property. The driver is unable to take the tiles into your house. We can deliver on a day of your choice, which will typically be 2 - 3 working days after your order has been placed. Delivery is charged by the pallet and starts from £45 / pallet. A ‘delivery calculator’ is provided underneath the Order Total once product quantity has been entered.

Somebody must be present on the day of delivery to accept the order - re-delivery charges may apply for failed deliveries.

Free delivery applies to pallets of indoor porcelain & LVT over £600 only. Certain postcodes do not qualify for free delivery and will require an additional delivery charge. Please refer to our delivery page for the full list of effected postcode areas.

Click here for detailed info about our delivery services.