This is an end-of-line product and will not be restocked once it sells out. To avoid shortages later, we advise ordering a little over the standard 10% extra to cover cuts and spares. As once it’s gone, it’s gone!

Delphine Blue patterned tiles bring a rich mix of colour and character, inspired by vintage encaustic tiles found in sun-soaked Mediterranean homes. The soft blues and earthy terracotta form a traditional design with a difference that feels warm, expressive and truly characterful.

The gentle patina surface of each tile, with its high variation, replicates the effect of original antiqued floor tiles that have mellowed over time. Whether you lay them across a kitchen floor, a statement hallway or as bathroom feature wall tiles, these porcelain tiles are easy to maintain, hard-wearing and perfectly suited to everyday life.

Each 45x45cm tile consists of four patterned pieces separated by score joints. Once laid and grouted, they look like individual pieces with the benefit of being much easier and quicker to install.

Key features:

• Finish: matt porcelain with an aged, antique-effect
• Durability: stain and water-resistant & impressively tough
• Style: perfect for characterful hallways, bathrooms, and kitchens
• Surface: Ideal for walls & floors

For more inspiration see our:

• Patterned Tiles
• Floor Tiles
• Wall Tiles

Perfect for

• living area
• kitchen
• bathroom
• wall
• floor

Adhesive

White rapid-setting flexible adhesive is recommended - standard setting adhesive is also suitable.

Sealing

Matte tiles do not require sealing during installation.

Grout

Only use fine grain grout. See fixing/ancillaries section for grout alternatives.

Cleaning

General household cleaners are acceptable but for the best results use a product specially formulated for Porcelain Tiles.  We recommend LTP Porcelain cleaner available in the fixing section.

Tolerances & Fitting

Porcelain tiles & porcelain paving slabs are subject to manufacturing tolerances in relation to size, flatness and squareness.  Please be aware that not all tiles/slabs will or can be perfectly the same size, flat or absolutely square.  The standard governing manufacturing tolerances is EN14411.  In relation to flatness, for example, a tile or slab can have an allowed curvature of +/-2mm measured at the centre of the slab using a straight edge across the entire slab.  It is not possible to accurately measure flatness by putting two tiles face to face as this doubles any visible curvature.  For more info, feel free to call to discuss with an expert.

Pallet Deliveries

Typical delivery times are 2 - 3 Working Days

Next Day delivery is available to most areas at additional cost.

We deliver throughout the UK except for Northern Ireland.

Deliveries are made on pallets and are ‘kerbside’, meaning the pallets will be offloaded to the nearest safe point of entry to your property. The driver is unable to take the tiles into your house. We can deliver on a day of your choice, which will typically be 2 - 3 working days after your order has been placed. Delivery is charged by the pallet and starts from £45 / pallet. A ‘delivery calculator’ is provided underneath the Order Total once product quantity has been entered.

Somebody must be present on the day of delivery to accept the order - re-delivery charges may apply for failed deliveries.

Free delivery applies to pallets of indoor porcelain & LVT over £600 only. Certain postcodes do not qualify for free delivery and will require an additional delivery charge. Please refer to our delivery page for the full list of effected postcode areas.

Click here for detailed info about our delivery services.