Odyssey Pearl White marble-effect tiles bring a gentle, almost coastal sense of calm to a space. Its pale base tones sit somewhere between warm white and soft beige, with subtle flickers of warm veining which give the tile an elegant, layered look. The matte surface has an etched finish, gently catching the light that lifts the overall look. 

These beautiful matte marble replica tiles have a slight chalky softness to them, which works beautifully under natural light and feels surprisingly tactile for a marble-effect porcelain tile. At 60×60 cm, the versatile square format lends itself well to bathroom walls, kitchen floors, and in-between spaces where you want something clean, bright, and easy to live with.

If you like the idea of bright marble without the upkeep, this durable, low-maintenance tile brings the best of both worlds, being relaxed, timeless, and quietly luxurious.

Key features:

• Finish: matte porcelain with an etched surface
• Durability: tough, water resistant and easy to clean
• Style: perfect for modern bathrooms and bright floors
• Surface: Suitable for walls & floors

For more inspiration see our:

• Marble-effect Tiles
• Bathroom Tiles
• Wall Tiles

Perfect for

• living area
• kitchen
• bathroom
• wall
• floor

Adhesive

White rapid-setting flexible adhesive is recommended - standard setting adhesive is also suitable.

Sealing

Odyssey Pearl White matt finish porcelain tiles DO NOT require sealing during installation.

Grout

Only use fine grain grout. See fixing section for grout alternatives. We recommend "Almond" grout with these tiles.

Cleaning

General household cleaners are acceptable but for the best results use a product specially formulated for Porcelain Tiles.  We recommend LTP Porcelain cleaner available in the fixing section.

Tolerances & Fitting

Porcelain tiles & porcelain paving slabs are subject to manufacturing tolerances in relation to size, flatness and squareness.  Please be aware that not all tiles/slabs will or can be perfectly the same size, flat or absolutely square.  The standard governing manufacturing tolerances is EN14411.  In relation to flatness, for example, a tile or slab can have an allowed curvature of +/-2mm measured at the centre of the slab using a straight edge across the entire slab.  It is not possible to accurately measure flatness by putting two tiles face to face as this doubles any visible curvature.  For more info, feel free to call to discuss with an expert.

Pallet Deliveries

Typical delivery times are 2 - 3 Working Days

Next Day delivery is available to most areas at additional cost.

We deliver throughout the UK except for Northern Ireland.

Deliveries are made on pallets and are ‘kerbside’, meaning the pallets will be offloaded to the nearest safe point of entry to your property. The driver is unable to take the tiles into your house. We can deliver on a day of your choice, which will typically be 2 - 3 working days after your order has been placed. Delivery is charged by the pallet and starts from £45 / pallet. A ‘delivery calculator’ is provided underneath the Order Total once product quantity has been entered.

Somebody must be present on the day of delivery to accept the order - re-delivery charges may apply for failed deliveries.

Free delivery applies to pallets of indoor porcelain & LVT over £600 only. Certain postcodes do not qualify for free delivery and will require an additional delivery charge. Please refer to our delivery page for the full list of effected postcode areas.

Click here for detailed info about our delivery services.