Yosemite Ash Outdoor Porcelain Paving Tiles 60x60cm

Actual size: 600x600x20mm  

WAS: £26.90 / m²

NOW: £20.90 / m²

Your Selection:

60 x 60 cm - IN STOCK

Add your area to calculate tiles required

=

Delivery from Tue 8th October

Add the recommended 10% for cuts and wastage

PLEASE NOTE: Avoid the expense & inconvenience of reordering. We strongly recommend you add at least 10% to your calculated area to be tiled to cover cuts, breakages and damages. All tiling jobs incur this type of wastage – don’t be left short!

  • Nationwide express delivery + Free delivery on indoor porcelain over £500*
  • Order 3 free samples
  • We are here to help - Call our team on 0161 277 6850

About this product

A spectrum of lovely contemporary shades of grey and a lightly textured surface gives the Yosemite Ash porcelain paving slabs the look of real stone tiles. Made from vitrified porcelain and intended for outdoor use, they are incredibly hard wearing and suitable for all kinds of landscaping projects. So, if you're looking for premium quality outdoor porcelain floor tiles, these flagstones will be the centrepiece of your garden design.

Square cut edges give these paving stones a clean cut look while anti-slip properties make these slabs a great choice for pool surrounds, terraces and patios. These porcelain tiles are low maintenance and resistant to moss, algae and mold. What's more, they're practically frost proof!

Also available in 90x60 format.

Order a free sample today to see how they'll look in your outdoor space.

When using brush-in grouts, we strongly recommend using LTP Porcelain Tile Protector to protect the slabs from resin in the grout that can bind to the surface and give a dusty appearance when dry. We advise 1 coat before and 1 coat after grouting as part of the installation procedure. We also recommend using ProJoint Porcelain Paving Primer when laying paving using sand or cement rather than adhesive.

 

Yosemite Ash Porcelain Paving Slabs is perfect for

Suitable for outdoors
outdoor

Features

Surface finishAntislip
EdgesSquare Cut [Rectified]
Weight50kg/sqm
DurabilityVery High
Colour variation from slab to slabLow
Ongoing maintenanceNone

Installation and care

Adhesive

Porcelain paving can be installed without fixing products as long as it's fully supported by a solid material.  It can be installed on grass, gravel and sand bases.  Porcelain paving can also be installed onto concrete/screed substrates with a suitable external grade adhesive.  All of our rapid setting adhesives are recommended. It can also be installed on sand and cement mortar bases same as traditional stone paving.  Porcelain paving is strong enough to be installed on "pedestal" systems.

Sealing

Porcelain paving requires no sealing or ongoing maintenance, unlike natural stone that requires regular cleaning and re-sealing. We do however strongly recommend using LTP Porcelain Tile Protector during installation as it protects the surface when using brush-in grouts that can potentially bind to the surface causing a “dusty” appearance when dry. It furthermore protects against staining from organic matter like berries and wet leaves over time.

Grout

Any external grade grout can be used.  Specific brush-in grouting systems have also been formulated for use with porcelain paving. We recommend ProJoint Rapidflow Brush-In Porcelain Grout in Mid Grey

Cleaning

Porcelain paving can be cleaned with any household product.  We do not recommend the use of acidic "patio cleaning" products that may damage the surface.  The use of high pressure washers is acceptable as long as the pressure is kept away from grout joints.

CLICK/TAP FOR PROTECTION & CLEANING GUIDE

 

Tolerances & Fitting

Porcelain tiles & porcelain paving slabs are subject to manufacturing tolerances in relation to size, flatness and squareness.  Please be aware that not all tiles/slabs will or can be perfectly the same size, flat or absolutely square.  The standard governing manufacturing tolerances is EN14411.  In relation to flatness, for example, a tile or slab can have an allowed curvature of +/-2mm measured at the centre of the slab using a straight edge across the entire slab.  It is not possible to accurately measure flatness by putting two tiles face to face as this doubles any visible curvature.  For more info, feel free to call to discuss with an expert.

CLICK/TAP FOR INSTALLATION GUIDE

Delivery

Pallet Deliveries

Kerbside

Flat Surface

Unobstructed Space

Heavy Load

 

 

Typical delivery times are 2 - 3 Working Days

Next Day delivery is available to most areas at additional cost.

We deliver throughout the UK except for Northern Ireland.

Deliveries are made on pallets and are ‘kerbside’, meaning the pallets will be offloaded to the nearest safe point of entry to your property. The driver is unable to take the tiles into your house. We can deliver on a day of your choice, which will typically be 2 - 3 working days after your order has been placed. Delivery is charged by the pallet and starts from £45 / pallet. A ‘delivery calculator’ is provided underneath the Order Total once product quantity has been entered.

Somebody must be present on the day of delivery to accept the order - re-delivery charges may apply for failed deliveries.

Free delivery applies to pallets of indoor porcelain & LVT over £500 only. Certain postcodes do not qualify for free delivery and will require an additional delivery charge. Please refer to our delivery page for the full list of effected postcode areas.

Click here for detailed info about our delivery services.

close CALL OUR TEAM
0161 277 6850

Or

SEND A MESSAGE

*
*
* (You can edit)